Tell A Friend About This Page!

 
NewAge Plastic Tubing, Hose, Fittings, and Clamps

CLEARFLO®INDUSTRIAL & NYLOBRADE® INDUSTRIAL

 
Go Back to
Tubing & Hose Page
PEP- Home
Clear Plastic Tubing and Hose  PVCClear Tubing & Hose - Industrial Grade
 
  • Made of first quality, virgin, industrial grade PVC
  • Crystal clear for visual contact with the flow
  • Nylobrade Industrial is reinforced with polyester yarn bonded within thewalls for increased pressure capability
  • Mirror smooth interior permits outstanding flow characteristics
  • Corrosion and abrasion resistant with flexibility similar to rubber butwith much longer life

Made in U.S.A.

APPLICATIONS

Air & Gas Lines • Chemical Lines • Instrumentation • Material Handling• Protective Jacketing • Pump Feed & Discharge • Refrigeration • Water& Fluid Lines
 

Physical Properties**

 CLEARFLO
INDUSTRIAL		NYLOBRADE
INDUSTRIAL
Hardness, Shore A ±5 6880
Tensile Strength, psi 19302600
Elongation at Break, % 460390
Brittle Temperature-36°F-22°F
Max. Operating Temperature 185°F185°F

**Values listed are typical and are meant only as a guideto aid in design. Field testing should be performed to find the actualvalues for the application.

RecommendedFittings & Clamps

 

Notes

Both CLEARFLO INDUSTRIAL and NYLOBRADE INDUSTRIAL clear plastictubing & hose are made from an industrial grade of PVC. They are notsuitable for use in sanitary or food contact applications. For food gradePVC, refer to standard CLEARFLO or standardNYLOBRADE.

CLEARFLO INDUSTRIAL and NYLOBRADE INDUSTRIAL are generallyunaffected by most oxidizing and reducing agents. Diluted acids and alkalieshave little effect, though if highly concentrated tend to make the tubingless pliable. If chemical resistance is of major concern, in-plant testsare suggested.

Although CLEARFLO INDUSTRIAL may be used for fuel andoil applications, gasoline and petroleum-based oils will eventually hardenthe material. To minimize this effect, a specially formulated Fuel andOil grade of CLEARFLO INDUSTRIAL is available by special order. 

As an alternative to clear NYLOBRADE INDUSTRIAL, NEWAGEAIR HOSE is available for compressed air applications. It offers a300 psi working pressure and is available in five standards colors.

 TOPOF PAGE

CLEARFLO INDUSTRIAL - UNREINFORCED

ID
(IN.)
-
1/8
3/16
1/4
3/8
3/8
1/2
5/8
3/4
1
OD
(IN.)
-
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
WORKING 
PSI AT 70°F
-
68
55
55
40
65
45
40
35
28
BURST
PSI AT 70°F
-
272
220
220
160
260
180
160
140
112
LBS.
PER
100 FT.
1.9 
2.5 
3.2 
4.5 
10.2 
12.8 
15.3 
17.9 
23.0 
-
PART NO.
-
1120126
112 0231
1120294
112 0441
1120483
112 0609
1120756
112 0882
1121008
Standard coil length is 100 ft. Add length suffix to partnumber when ordering.
Example: 100 ft. of 1/8" I.D. x 1/4" O.D. tubing is partnumber 112 0126-100.
Cut coils are available; charges apply -- call for details.
BOLD indicates the critical dimension for fittingsapplication.

 TOPOF PAGE

NYLOBRADE INDUSTRIAL - REINFORCED

ID
(IN.)
-
1/4
3/8
1/2
5/8
3/4
1
1-1/2
2
OD
(IN.)
-
7/16
5/8
3/4
7/8
1
1-3/8
2
2-1/2
WORKING 
PSI AT 70°F
-
316
235
215
200
150
130
70
50
BURST
PSI AT 70°F
-
948
705
645
600
450
390
210
150
LBS.
PER
100 FT.
5.4 
10.5 
13.1 
15.7 
18.3 
37.3 
73.3 
94.3 
-
PART NO.
-
1080065
108 0233
1080275
108 0317
1080359
108 0443
1080569
108 0653
Standard coil length is 100 ft. Add length suffix to partnumber when ordering.
Example: 100 ft. of 1/4" I.D. x 7/16" O.D. hose is partnumber 108 0065-100.
Cut coils are available; charges apply -- call for details.
BOLD indicates the critical dimension for fittingsapplication.

 TOPOF PAGE

BACK TO TUBING & HOSEPAGE
PEP- Home