Tell A Friend About This Page!
NewAge Plastic Tubing, Hose, Fittings, and Clamps

NEWTEX

  
Go Back to
Tubing & Hose Page
PEP - Home
   Natural Latex Rubber Tubing
 
  • Made from natural latex, a thermoset material
  • Excellent resilience, tear, and tensile strength
  • Made from non-toxic ingredients conforming to FDA standards 
  • Extremely elastic with excellent memory after repeated stretching
  • Contains no plasticizers which can migrate and cause flow contamination or tube hardening
  • NEWTEX is a translucent amber color

Made in U.S.A.

APPLICATIONS

Drain Tubing • Elastic Bands • Exercise Devices • Medical Connector Lines • Model Glider Launching • Non-Aerosol Cans • 'O'-Ring Gaskets • Photographic Chemicals • Shock Absorbers • Tourniquet Bands
 

Physical Properties**

Hardness, Shore A ±5 35
Tensile Strength, psi 3500
Elongation at Break, % 750
Brittle Temperature -60°F
Max. Operating Temp. 180°F

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

Recommended Fittings & Clamps

  

Notes

NEWTEX tubing is an exceptionally resilient material that has notable wear resistance, very low permanent set characteristics, and excellent flexibility at low temperatures.

NEWTEX will withstand repeated sterilization with autoclaving at 250°F for 20 minutes. It will also endure limited sterilization with ethylene oxide or gamma radiation.

Since natural rubber NEWTEX has some sulphur trace, synthetic NEWTEX (polyisoprene), which is made without sulphur, can be supplied through minimum order. Synthetic NEWTEX can also be cured in straight lengths — call for details. Synthetic NEWTEX should also be considered for its translucency, as natural latex’s amber color is quite dark.

Also available through special order is vacuum-rated, red-colored NEWTEX — call for details.

 TOP OF PAGE

NEWTEX - Natural Amber

ID
(IN.)
 
1/16
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
1/2
1/2
3/4
OD
(IN.)
 
1/8
3/16
1/4
5/16
3/8
7/16
3/8
7/16
1/2
7/16
1/2
9/16
1/2
9/16
5/8
11/16
3/4
1
WALL
(IN.)
 
1/32
1/32
1/16
1/16
3/32
1/8
1/16
3/32
1/8
1/16
3/32
1/8
1/16
3/32
1/8
3/32
1/8
1/8
STANDARD
LENGTH 
(FT.)^
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
LBS. PER
100 FT.
 
1.00
1.50
2.00
2.50
4.00
6.00
3.25
5.25
6.50
3.75
6.25
9.00
5.00
7.00
9.50
9.00
12.50
17.00
 
PART NO.
 
270 0110
270 0222
270 0334
270 0446
270 0558
270 0670
270 0782
270 0894
270 1006
270 1118
270 1230
270 1342
270 1454
270 1566
270 1678
270 1790
270 1902
270 2014
Sold by standard coil length only. Add length suffix to part number when ordering.
Example: 100 ft. of 1/16" I.D. x 1/8" O.D. tubing is part number 270 0110-100.
^Tubing may have a maximum of five sections, with a minimum section length of 4 feet, in 100 ft. lengths;
maximum of three sections, with a minimum section length of 4 feet on 50 ft. lengths.
BOLD indicates the critical dimension for fittings application.

 TOP OF PAGE

BACK TO TUBING & HOSE PAGE
PEP - Home