Tell A Friend About This Page!
NewAge Plastic Tubing, Hose, Fittings, and Clamps

NYLOBRADE®

 
Go Back to
Tubing & Hose Page
PEP- Home

Made in U.S.A.
  BraidReinforced PVC Hose
 
  • Open mesh polyester braiding encapsulated between walls of PVC tubing tobecome one hose
  • Offers far higher pressure capabilities than unreinforced PVC tubing
  • Crystal clear compound provides full visual flow (thin and standard wall)
  • Made from non-toxic ingredients conforming to FDA standards 
  • Mirror smooth interior permits outstanding flow characteristics
  • Corrosion and abrasion resistant with flexibility similar to rubber butwith much longer life

APPLICATIONS

Beverage Lines • Chemical Transfer • Coolant Lines • Food Handling • Hydraulics• Instrumentation Lines • Material Handling • Oil & Fuel • Pneumatics• Spray Systems • Water & Fluid Feeds
 

Physical Properties**

Hardness, Shore A ±5 80
Tensile Strength, psi 2500
Elongation at Break, % 320
Brittle Temperature-50°F 
Max. Operating Temperature 175°F 

**Values listed are typical and are meant only as a guideto aid in design. Field testing should be performed to find the actualvalues for the application.

RecommendedFittings & Clamps

 

Notes

Clear NYLOBRADE is made from non-toxic ingredients selectedfrom those approved by the Food and Drug Administration (FDA). It is non-contaminatingin odor or taste. 

NYLOBRADE is generally unaffected by most oxidizing andreducing agents. Diluted acids and alkalies have little effect, thoughif highly concentrated tend to make the hose less pliable. If chemicalresistance is of major question, in-plant tests are suggested.

Gasoline and oils will harden PVC over periods of intermittentuse. The hardening process will be greatly reduced under continuous useapplications.

Heavier walls on similar I.D.s will be more resistantto kinking. NYLOBRADE HP (High Pressure) sizes 3/8" I.D. and up have atighter braid pattern and, therefore, reduce the visual flow contact andincrease the hose's resistance to bending & flexing.

Custom sizes, colors, and other durometers are availablethrough minimum order. Heat-formed shapes, bonding, and other custom fabrication,such as a ribbed O.D. for greater flexibility and abrasion resistance,are also available -- call for details. Samples of stock material are availableupon request.

Opaque colored AIR HOSE is availablefrom stock in bright, easy-to-see colors for quick identification, tracing,and color coding. 

NSF-approved NYLOBRADE is available - contact us for details.

TOP OF PAGE

NYLOBRADE

ID
(IN.)
-
1/8
3/16
1/4
1/4
1/4
5/16
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
2
2
OD
(IN.)
-
.315
.394
.435
29/64
1/2
17/32
.575
.600
5/8
.710
.728
.850
29/32
1.024
1-1/8
1.299
1-3/8
1.732
1.732
1.929
1.950
2-1/2
2-1/2
WALL
TYPE^
-
Std.
Std.
Thin
Std.
HP
Std.
Thin
Std.
HP
Thin
Std.
HP
Std.
Std.
HP
Std.
HP
Std.
HP
Std.
HP
Std.
HP
STD.
LENGTH
(FT.)^^
100,500
50, 100, 500
100
50, 100, 500
50,100, 500
50, 100, 500
100
50, 100, 500
50,100, 500
100
50,100, 200, 500
50, 100, 500
50,100, 200, 300, 500
50, 100, 300, 500
50,100, 200, 300
50, 100, 300
50,100
50, 100
50,100
50, 100
50,100
50, 100
50,100
WORKING 
PSI AT 
70°F
465
315
316
300
400
280
215
230
265
191
215
258
200
150
233
130
185
110
150
70
90
50
133
BURST 
PSI AT 
70°F
1395
945
948
900
1200
840
645
690
795
573
645
774
600
450
699
390
555
330
450
210
270
150
399
LBS/
CFT
-
3.53
5.06
5.35
6.03
6.03
7.77
8.02
9.26
9.26
10.73
11.82
20.00
18.17
20.53
20.53
29.03
29.03
60.70
60.70
62.12
62.12
95.02
95.02
-
PART NO.
-
100 0076
100 0230
103 0309
100 0307
102 0061
100 0461
103 0540
100 0538
102 0075
103 0694
100 0692
102 0096
100 0846
100 0923
102 0117
100 1154
102 0005
100 1308
102 0012
100 1385
102 0019
100 1462
102 0026
^Std. = standard; HP = high pressure.
^^Add length suffix to part number when ordering.
Example: 500 ft. of 1/8" I.D. x .315" O.D. is part number100 0076-500.
BOLD indicates the critical dimension for fittingsapplication.

TOP OF PAGE

BACK TO TUBING& HOSE PRODUCTS PAGE
PEP- Home