Tell A Friend About This Page!
NewAge Plastic Tubing, Hose, Fittings, and Clamps

OETIKER® CLAMPS

 
BACK TO CLAMPS & ACCESSORIESMAIN PAGE
PEP- Home
  EarType Clamps
 
  • Oetiker ear type clamps "breathe" and adapt to the expansion and contractionof hose affected by thermodynamics or aging-- no need to retighten 
  • Clamps are lightweight and compact -- important when bulky screw-type clampsinterfere with limited space applications 
  • Provides a tamper-proof seal without damage to the hose 

Notes

All Oetiker clamps are sold in increments of 100 pcs.

One Ear Special clamps are available through custom order. These clampsfeature one-piece design made from spirally welded tubing to provide astrong grip with a smooth inner & outer band surfaces. The one-eardesign allows for easy access. Call for details.

 

ONE EAR

  • Made of 304 AISI stainless steel or zinc plated 1008/1010carbon steel 
  • Features a mechanical lock at the joint instead of a spotweld -- prevents failure due to corrosion 
  • Low pressure applications -- up to 440 psi maximum**
 
NOM.
OD (IN.)
-
3/8
7/16
15/32
1/2
35/64
9/16
5/8
11/16
23/32
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-15/32
1-1/2
1-9/16
INCHES
OPEN-CLOSED
-
.414- .350
.444 - .381
.486- .394
.524 - .453
.551- .472
.571 - .496
.618- .543
.669 - .594
.728- .618
.779 - .669
.827- .716
.890 - .779
.949- .839
1.008 - .898
1.067- .945
1.126 - 1.004
1.185- 1.063
1.244 - 1.122
1.303- 1.181
1.362 - 1.240
1.421- 1.299
1.480 - 1.358
1.500- 1.378
1.559 - 1.437
PART NO
ZINC PLATED
-
584 0072
584 0086
584 0093
584 0100
584 0114
584 0121
584 0135
584 0149
584 0156
584 0163
584 0177
584 0191
584 0205
584 0219
584 0233*
584 0247*
584 0261*
584 0275*
584 0289*
584 0303*
584 0317*
584 0324*
584 0331*
584 0345*
PART NO
STAINLESS
STEEL
582 0073
582 0087
582 0094
582 0101
582 0115
582 0122
582 0136
582 0150
582 0157
582 0164
582 0178
582 0192
582 0206
582 0220
582 0234*
582 0248*
582 0262*
582 0276*
582 0290*
582 0304*
582 0318*
582 0325*
582 0332*
582 0346*
Larger sizes are available - call for details.
* Limited stock availability; lead times & minimumsmay apply - call for details.
**All pressure references are maximum achievements, underlaboratory conditions, using a static water pressure test.
Because each application has its own set of variables,actual application pressures may differ from those noted.
Field testing should be performed to determine the actualvalue for the application.

 TOPOF PAGE

 

TWO EAR

  • 300 AISI stainless steel or zinc plated 1008/1010 carbonsteel 
  • One-piece design made from spirally welded tubing
  • Moderate pressure applications -- up to 800 psi maximum*;(with two clamps cross applied) 
  • Suitable for low pressure hydraulic applications 
 
NOM.
OD (IN.)
-
5/32
11/64
3/16
1/4
5/16
3/8
7/16
1/2
9/16
19/32
5/8
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-5/16
1-7/16
1-1/2
INCHES
OPEN-CLOSED
-
.161- .122
.177 - .138
.197- .118
.276 - .197
.354- .276
.433 - .315
.433- .354
.512 - .433
.591- .512
.669 - .591
.708- .591
.787 - .669
.866- .748
.905 - .787
.984- .866
1.063 - .905
1.102- .984
1.220 - 1.063
1.220- 1.102
1.339 - 1.220
1.457- 1.339
1.575 - 1.457
PART NO.
ZINC PLATED
-
584 2669*
584 2676*
584 2683
584 2711
584 2739
584 2767
584 2795
584 2823
584 2851
584 2865
584 2879
584 2935
584 2963
584 2991
584 3019
584 3047
584 3061
584 3075
584 3089
584 3117
584 3145
584 3159
PART NO.
STAINLESS
STEEL
582 2670*
N/A
582 2684
582 2712
582 2740
582 2768
582 2796
582 2824
582 2852
582 2866
582 2880
582 2936
582 2964
582 2992
582 3020
582 3048
582 3062
582 3076
582 3090
582 3118
582 3146
582 3160
* Limited stock availability; lead times & minimums mayapply - call for details.
**All pressure references are maximum achievements, underlaboratory conditions, using a static water pressure test.
Because each application has its own set of variables,actual application pressures may differ from those noted.
Field testing should be performed to determine the actualvalue for the application.

 TOPOF PAGE

 

ONE EAR STEPLESS

  • Made of 304 AISI stainless steel 
  • Patented design guarantees 360° seal preventing leakson soft or thin walled hose or tubing 
  • One-ear design allows easy accessibility 
  • Low pressure applications -- up to 500 psi maximum**
NOM.
OD (IN.)
--
9/32
5/16
11/32
3/8
25/64
13/32
7/16
29/64
15/32
1/2
17/32
35/64
9/16
5/8
11/16
23/32
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-15/32
1-1/2
1-9/16
INCHES
OPEN-CLOSED
-
.275- .228
.315 - .268
.343- .275
.374 - .307
.394- .327
.413 - .346
.445- .378
.465 - .398
.484- .385
.524 - .425
.543- .449
.551 - .453
.571- .472
.618 - .520
.669- .571
.728 - .602
.779- .654
.827 - .701
.890- .764
.949 - .823
1.008- .882
1.067 - .945
1.126- 1.004
1.185 - 1.063
1.244- 1.122
1.303 - 1.181
1.362- 1.240
1.421 - 1.299
1.480- 1.358
1.500 - 1.378
1.559- 1.437
-
PART NO.
-
582 5351
582 5365
582 5379
582 5393
582 5400
582 5407
582 5421
582 5428
582 5435
582 5449
582 5463
582 5470
582 5477
582 5505
582 5533
582 5547
582 5561
582 5589
582 5617
582 5645
582 5673
582 5687
582 5701
582 5715
582 5729*
582 5743*
582 5757*
582 5771*
582 5778*
582 5785*
582 5799*

STANDARD JAW PINCER

PART NO. 
-
980 0182

-
 

SIDE JAW PINCER

PART NO. 
-
980 0203
The dual purpose Side Jaw Pincer design allowsclamps to be applied or removed in confined areas with pincers held parallelto the hose. It may also be used like Standard Jaw Pincers.

For extremely tight areas, a new Narrow Jaw Pincer (3/8"jaw width) is available - call for details.

* Limited stock availability; lead times & minimums mayapply - call for details.
**All pressure references are maximum achievements, underlaboratory conditions, using a static water pressure test.
Because each application has its own set of variables,actual application pressures may differ from those noted.
Field testing should be performed to determine the actualvalue for the application.

 TOPOF PAGE

BACK TO CLAMPS& ACCESSORIES MAIN PAGE
PEP- Home