Tell A Friend About This Page!
NewAge Plastic Tubing, Hose, Fittings, and Clamps

SNAPFLEX FITTINGS

 
BACK TO FITTINGS PAGE
PEP- Home
  PlasticQuick Disconnect Fittings
 
  • Easy-to-operate design permits one hand connect-disconnect
  • Lightweight and small in size -- perfect for instrument uses
  • Available in three materials -- Acetal, Polypropylene, or Polysulfone
  • Less costly than stainless steel counterparts
  • Four flow sizes available -- 1/8", 1/4", 3/8", and 1/2"
  • Straight through or shut-off designs (for connection and disconnectionunder pressure) available

Made in U.S.A.

Manufactured by CPC

TWO AVAILABLE TUBE FITTINGDESIGNS:

Hose Barb Fitting

The conventional tubing connector for use with soft tubingsuch as flexible PVC, polyurethane, rubber, silicone, etc. A durable andreusable design.

Push-to-Connect Fitting

The same leak-resistant, plastic push-to-connect fittingfound on our Newloc line is now available on some^ Snapflex items. Fastand easy connections and disconnections can be made without tools. Excellentfor use with polyethylene, nylon, hard durometer polyurethane, and softmetallic tubing.

^Currently available on some 1/4" flow Acetal fittings.

 TOPOF PAGE

Notes

ACETAL

Coupling: 
Natural White Delrin® Acetal
Valve Spring: 
316 Stainless Steel 
External Springs, Pin, & Latch: 
Stainless Steel
Panel Mount Nut: 
Nickel Plated Brass
'O'-Ring: 
Buna-N
*Max. Working Pressure at 70°F: 
120 psi
*Working Temp.: 
-40°F to 180°F

POLYPROPYLENE

Coupling: 
Almond Polypropylene (1/8" & 1/4" flow)

Light Grey Polypropylene (3/8" flow)
Thumb Latch: 
Stainless Steel (1/8" & 1/4" flow)

Charcoal Grey Polypropylene (3/8" flow)
External Springs & Latch: (1/8" & 1/4" flow): 
Stainless Steel
Panel Mount Nut: 
Nickel Plated Brass (1/8" & 1/4" flow)

Charcoal Grey Polypropylene (3/8" flow)
Valve Spring: 
316 Stainless Steel
'O'-Ring: 
EPDM
*Max. Working Pressure at 70°F: 
120 psi (1/8 flow)

100 psi (1/4 flow)
60 psi (3/8 flow)
*Working Temp.: 
-32°F to 230°F

POLYSULFONE

Coupling: 
White Polysulfone
Thumb Latch: 
Charcoal Grey Polysulfone
Panel Mount Nut: 
Charcoal Grey Polysulfone
Spring: 
316 Stainless Steel
'O'-Ring: 
EPDM (3/8" flow)
FDA Buna-N (1/2" flow)
Panel Mount Gasket: 
EPDM (3/8" flow)

FDA Buna-N (1/2" flow)
GHT Gasket: 
Vinyl (3/8" flow)

FDA Buna-N (1/2" flow)
*Max. Working Pressure at 70°F: 
125 psi
*Working Temp.:
-40°F to 280°F (3/8" flow)

-40°F to 250°F (1/2" flow)

*The listed pressure and temperature values are meantonly as a guide to aid in design.
Clamps must be used in higher pressure applications.Field testing should be performed to find the actual values for the application.

 TOPOF PAGE

SNAPFLEX OPTIONS

Chrome-Plated Brass

For higher working pressures and improved aesthetics, considerchrome-plated brass fittings. These fittings may be used interchangeablywith Snapflex Acetal fittings of like flow size. Contact your sales representativefor more information.

Coupling: Chrome-Plated Brass
Shutoff Valve: Delrin® Acetal
Shutoff Valve Spring: 316 Stainless Steel
External Pin & Latch Springs: Stainless Steel
Panel and PTF Nut: Nickel Chrome Plated Brass
'O'-Ring: Buna-N
*Max. Working Pressure at 70°F: 250 psi
*Working Temp.: -40°F to 180°F

 

Custom Colors

Custom molded or dyed colors may be ordered for color codingor aesthetics. Minimums will apply. Call your sales representative formore information or a quote.

'O'-Ring Seals

Special 'O'-Ring Seals are available in Buna-N, EPDM, Viton®,Aflas, food grade Buna-N or EPDM, and a wide range of specialty elastomersfor specific applications. Call your sales representative for more information.

*The listed pressure and temperature values are meantonly as a guide to aid in design.
Field testing should be performed to find the actualvalues for the application.

 TOPOF PAGE

Select a category below togo to a complete listing

 
ACETAL & POLYPROPYLENE
POLYSULFONE
 TOP OFPAGE
BACK TO FITTINGSMAIN PAGE
PEP- Home