Vardex® Steel Wire Reinforced PVC Hose

VARDEX^®

Go Back to
Tubing & Hose Page

		SteelWire Reinforced PVC Hose
		Spiral steel wire reinforcement incorporated within the wall of flexiblePVC tubing Made from non-toxic ingredients conforming to FDA standards Kink and crush resistant Handles pressure and full vacuum (29.9 in./Hg.) applications Glass-like clarity with mirror-smooth surfaces provide outstanding visualflow characteristics Lightweight yet tough and abrasion resistant

APPLICATIONS

Chemical Transfer . Conduit . Coolant Lines . Environmental Suit Air Feed. Equipment . Floor Cleaning . Food & Beverage Lines . Material Handling. Shop Air Supply . Spray Systems . Vacuum Lines . Water Feeds

Physical Properties**

Hardness, Shore A ±5	73
Tensile Strength, psi	2100
Elongation at Break, %	270
Brittle Temperature	23°F
Max. Operating Temperature	150°F

**Values listed are typical and are meant only as a guideto aid in design. Field testing should be performed to find the actualvalues for the application.

RecommendedFittings & Clamps

Notes

VARDEX, with its steel wire reinforcement coil, is speciallysuited for applications where resistance to kinking is of primary importance.A proprietary construction technique employed during the manufacture ofVARDEX permits full vacuum capabilities (29.9 in./Hg.) for all sizes withouthose collapse.

Constructed of corrosion-resistant PVC, VARDEX can beused to transport various chemicals in areas with tight turns and sharpbends. Its bend radius is approximately four times the I.D.

For easy identification, VARDEX is imprinted with thetrademarked name.

Metric sizes, repetitive cutting, and bonding are availablethrough minimum order; lead times may apply -- call for details. Samplesof stock material are available upon request.

TOPOF PAGE

VARDEX

(IN.)

1/4

3/8

1/2

5/8

3/4

1-1/4

1-1/2

OD
(IN.)
-
29/64
.610
.748
29/32
1.024
1.319
1.634
1.909
2.382

WORKING
PSI AT 70°F
-
200
175
140
100
100
85
85
85
70

BURST
PSI AT 70°F
-
600
525
420
300
300
255
255
255
210

LBS/
CFT
-
6.6
11.5
15.0
19.8
24.0
37.6
49.0
67.2
85.0

-
PART NO.
-
140 0070
140 0112
140 0154
140 0196
140 0238
140 0280
140 0322
140 0364
140 0406

Standard coil length is 100 ft. Add length suffix to partnumber when ordering.
Example: 100 ft. of 1/4" I.D. x .453" O.D. hose is partnumber 140 0070-100.
Cut coils are available; charges apply -- call for details.
BOLD indicates the critical dimension for fittingsapplication.

TOPOF PAGE

BACK TO TUBING & HOSEPRODUCTS PAGE

PEP- Home

VARDEX®